SI OPPRESSOR Universal

The Strike Industries OPPRESSOR Universal is a blast shield that works with almost any muzzle device on the market that has a maximum outer diameter of 25.00mm (0.98”). This OPPRESSOR U version works just like the rest of the SI OPPRESSOR family and redirects blast and sound while maintaining the recoil reduction of muzzle devices. Designed with a SI proprietary 3-lug quick detach base, the OPPRESSOR Universal is easily installed and removed with a push and a slight turn. Install SI OPPRESSOR Universal 3-lug QD base, the included correct sized crush washer, properly set the timing/alignment of your muzzle device and you are ready to go. Fire your weapon with or without the OPPRESSOR Universal on. The OPPRESSOR family is multi-caliber compatible with .223/5.56, .308/7.62 and 9mm calibers. The OPPRESSOR U is made of a steel core with a 6061-T6 aluminum body and is anodized. The Universal continues the SI OPPRESSOR line for redirecting the gas pressure produced by aggressive brakes and compensators. Advanced internal geometry actively draws the gasses out and thrusts the gasses forward through ports to accomplish linear braking in order to retain more efficiency. The SI OPPRESSOR Universal can be rapidly installed before indoor shooting, outdoor public firing line or being kind to the classmates next to you while training.

COMPATIBILITY:
-1/2" and 5/8" threaded barrels
-Muzzle devices with a maximum diameter of 25.00mm (0.98")
-Multi-caliber with .223/5.56, .308/7.62 and 9mm
-Overall diameter of OPPRESSOR U is 41.00mm (1.61")
NOT COMPATIBLE: SI OPPRESSOR & OPPRESSOR LITE compatible SI muzzle devices

-DO NOT ATTEMPT INSTALLATION WITHOUT VIEWING THE INSTALLATION VIDEO: (INSTALL VIDEO LINK HERE)
-Test fit the SI OPPRESSOR Universal over your muzzle device before purchasing: (MOCKUP VIDEO LINK HERE)
-Mockup: (DOWNLOAD MOCKUP PDF LINK HERE)
-How to Use: (HOW TO USE VIDEO LINK HERE)

WARNING: Ensure proper clearance from all parts of weapon when attaching and removing OPPRESSOR from 3-lug QD base

NOTE:
-Outer diameter exceeds 40mm (1.57”) which clears less handguards on the market including SI handguards/rails. Will not fit in most handguards for that tuck look. Triple check the product specifications and measure your handguard/rail.
-Aluminum material will wear out faster than steel
-Due to numerous factors that take place during the anodization process, the color lines from batch to batch of a certain product may vary

SI ODGLINE, FDELINE, BLUELINE & REDLINE ANODIZED VERSIONS AVAILABLE FOR PURCHASE AT:

www.wingtactical.com - CLICK HERE